LocksmithMaster Milwaukee: Locksmith Master Milwaukee: What To Do With A Jammed Safe

A safe that you can’t open isn’t exactly useful. It might be doing its job of keeping your items protected, but if you can’t get into it, it is nothing short of stressful. This is especially true if you urgently need to get into your safe, for instance, if you are trying to drop off a deposit at work. So what are you supposed to do if your safe is locked and you are unable to get in? What are you supposed to do if your safe is jammed? Whether you use your safe to hold money, valuable items or a weapon, it is important that you take the right steps if it becomes jammed. You don’t want to cause any costly damage when the solution is actually quite simple. Have a look at some of the tips provided by Locksmith Master Milwaukee in Milwaukee, WI. This information is applicable to anyone, anywhere. Of course, you can always get in touch with an experienced locksmith if this seems to be the safer route for you.

Maybe you were in the middle of a move and you stuffed your gun safe with newspaper or bubble wrap to prevent the gun or weapon from shifting too much while en route. The problem is that now when you attempt to insert your key to open the safe, it doesn’t budge. What you don’t want to do is start wiggling or shaking the safe around out of anger. It might be jammed because of too much pressure on the inside and you don’t want to break the items inside of it or cause any further damage.

Perhaps you work in a store in which money is stored in a safe and then deposited at night or first thing in the morning. Locksmiths often get phone calls from business owners or managers who are unable to open their safe. One thing to avoid is taking a hammer to the safe to try to break it open. These things cost money after all!

So what are you supposed to do if you find yourself dealing with a jammed safe or any of the aforementioned scenarios? Here are a few things to try…

First and foremost, check the battery. A dead battery will mean that your keypad isn’t working because it isn’t providing the right signal to unlock the safe. There might be enough power to operate the keypad but this doesn’t mean that there is enough power to open it. This can be confusing, but it is often times the case. Make sure that if you purchase a battery, you buy the brand name counterpart, because if you buy a different brand, it might work but it will very likely drain faster. Often times, people buy something that wasn’t made for their brand in an effort to save money. However, they later regret it because the battery doesn’t last as long.
If the bolt work is jammed, you might be able to hear that the motor is trying to do its job. You could try applying pressure by pressing on the door, just make sure to avoid hitting the keypad. If there is pressure on the bolt, you could try turning the handle in the opposite direction that you would typically turn it in while entering the code, which will lessen some of the pressure that is on the bolt.
If the safe has gone into lockout mode because the wrong code was put in too many times, then you might just have to wait a certain amount of time before you are able to open it again.
If the problem is disconnected wiring, try disconnecting the wire from the keypad, and then take out the batteries. Wait a few seconds, then put the batteries back in and reconnect the wiring. That is if you know what you are doing. When you take off the keypad you should be able to see if the wires are loose or cut at all.

These are just some of the steps to take if you are dealing with a safe that is jammed or otherwise will not open. If you happen to be in Milwaukee, Wisconsin then you can call in the best locksmith in town. Locksmith Master Milwaukee has helped to unlock many safes before, but you can surely contact the local lock and security provider in your area to obtain similar assistance. Make sure to call a person who is licensed and insured so that you can trust no damage will be done to your safe. After all, some safes are incredibly expensive, and you want to keep yours in good shape. Whether you have a drop safe or deposit safe (these are popular in shops and restaurants), a fire rated safe (these are common in both homes and offices) or an office safe (these can be freestanding or bolted down to the floor, and are often times drop-tested) or any other kind of safe such as an in floor safe or high security safe, you should know that it can eventually become jammed. It could eventually end up needing a combination change, or the help of a locksmith to unlock it. Be sure to try out the steps listed to see if they help you out. This could save you a little bit of money and sometimes the solution is easier than it appears to be. But don’t take any chances and cause damage to your expensive device. Some safes are drop-tested, so no amount of kicking at it or throwing it is going to help to unlock it. They are meant to protect your items after all.

Call a locksmith in Milwaukee, WI if your safe is jammed and you are unable to open it. Don’t get too frustrated and try to break it because you will probably regret it later.